An open ceiling with ducts, cable trays and timber in a Liberty Village office was fully masked and spray-painted matte black with an airless rig overnight, a finish no roller could reach.
Commercial Spray Painting Toronto Industrial Spray Painting Contractors | Toronto Spectrum Commercial Painters
Airless, HVLP and electrostatic spraying for fast, factory-smooth commercial finishes.
Get a Fixed-Price Spray Painting Quote
Free site walkthrough. Estimator reply within 2 business hours.
Commercial Spray Painting Before and After: Recent Toronto Projects
Real commercial spray painting work by our Toronto crews. Same building, same angle. Drag the handle to compare.
Commercial spray painting puts more paint on more surface in less time, with a smoother finish than a roller can give. Our commercial spray painting crews run airless rigs for walls, ceilings and decks, HVLP for fine finish work on doors, millwork and trim, and electrostatic guns for metal. Masking film, overspray control and dryfall products protect everything that should stay clean.
Commercial spray painting is a technique we apply across our services, so it is priced by surface and system rather than a single rate. Large open walls and ceilings usually cost less per square foot sprayed than rolled, and the written quote shows the method chosen for each surface.
How Much Does Commercial Spray Painting Cost in Toronto?
Commercial Spray Painting runs Quoted per project quoted per project . Technique applied across services; priced by surface and system.
Airless spraying
By surface
- Walls, ceilings, decks
- Fastest coverage
- Back-rolled where specified
HVLP finishing
By item
- Doors, frames, millwork
- Brush-free fine finish
- Low overspray
- Shop or in-place
Electrostatic spraying
By item
- Metal doors and frames
- Elevators and partitions
- Wraps around edges
- No removal
Fixed-price written commercial spray painting quote: the approved number is the invoice number unless you sign off on a scope change. All prices + 13% HST.
Try the cost calculatorWhat Is Commercial Spray Painting?
Commercial spray painting applies paint with pressurized equipment instead of rollers and brushes. It is the fastest way to coat large surfaces and the best way to get a smooth, uniform finish on doors, metal and complex shapes like exposed ductwork. Our commercial spray painting crews use three main systems:
- Airless sprayers pump paint at high pressure through a small tip. Best for walls, ceilings, decks and exposed structure.
- HVLP (high volume, low pressure) atomizes paint gently for fine, low-overspray finishes on doors, frames and millwork.
- Electrostatic guns charge the paint so it wraps around metal, covered on our electrostatic coating page.
Spray vs Roll on Commercial Jobs
| Spray | Roll | |
|---|---|---|
| Speed on large open areas | Much faster | Slower |
| Finish | Smooth, uniform | Light stipple texture |
| Masking needed | Extensive | Minimal |
| Best for | Ceilings, decks, exposed structure, doors, metal | Occupied rooms, cut-in heavy areas |
| Porous block | Spray then back-roll | Roll |
In practice, most commercial spray painting jobs combine both. We spray what sprays well and roll where masking would take longer than the paint.
Overspray Control
Overspray is the risk with spraying, so control is part of every plan. We mask with film, paper and tape, set tip size and pressure for the product, use HVLP or electrostatic where overspray must be minimal, and specify dryfall products when spraying ceilings over stock or equipment. Spraying in occupied buildings is done after hours.
Spray painting tip
Ask whether your quote includes back-rolling on block walls. Spray-only on porous block can leave pinholes that let moisture in.
Where We Use Commercial Spray Painting
- Warehouse ceilings and Q-deck with dryfall, see warehouse painting
- Plant walls, steel and equipment, see factory and industrial painting
- Exposed loft ceilings in King West and Liberty Village
- Office doors, frames and millwork with HVLP
- Metal doors, elevators and partitions with electrostatic
Why Clients Choose Our Commercial Spray Painting Crews
Our crews run professional Graco rigs, mask carefully and spray after hours across Vaughan, Mississauga and the GTA, with WSIB, $5M liability and $2M pollution coverage. That is the same standard our commercial painters in Toronto bring to every building type.
Why Property Managers Hire Us for Commercial Spray Painting
Four reasons property managers and operators book our commercial spray painting crews across Toronto and the GTA.
Right rig for the job
Airless, HVLP or electrostatic chosen per surface, not one tool for everything.
Masking discipline
Film, paper and tape on everything that stays clean. Overspray controlled.
Smoother finishes
No roller stipple or brush marks on doors, trim and metal.
Faster schedules
Large walls, decks and ceilings finished in fewer shifts.
How Our Commercial Spray Painting Process Works
Every commercial spray painting job follows the same six steps, from the free walkthrough to the warranty certificate.
Spraying can cut application time on large open areas substantially; masking takes longer, so total time depends on the space.
- 01
Site Walkthrough
Day 0, freeAn estimator measures, photographs the surfaces and talks through your schedule, finishes and access rules.
- 02
Written Quote
Day 1-3Fixed price with product spec sheets, a disruption plan, insurance documents and a timeline you can take to your board or owner.
- 03
Contract + Deposit
Day 3-7A 25% deposit secures the start date. Scope, products, finish and warranty are named in the contract.
- 04
Pre-Job Protection
Day 1Floor protection, HEPA air scrubbers, equipment moved or covered and tenant or staff notices posted.
- 05
Painting Execution
DailyA signed daily job log, after-hours check-ins with your keyholder and dustless prep wherever it is required.
- 06
Walkthrough + Warranty
HandoverPunch-list walkthrough, warranty certificate and a Net 30 B2B invoice that matches the approved quote.
Free walkthrough, fixed-price written quote, no obligation
Written commercial spray painting quote within 72 hours. $5M liability and WSIB on every job.
Spray Painting Clients on Schedule, Quality and Cleanup
"Mississauga DC full repaint around 24/7 shipping. Finished ahead, no shutdown."
"After-hours office repaint, three floors King St. Fri 7pm to Mon 5am. Invoice matched quote."
Commercial Spray Painting Cost, Timing and Scheduling Questions
Straight answers about commercial spray painting in Toronto: cost, timing, products and scheduling.
Spray vs roll: which is better on commercial jobs?
Spraying is faster on large open walls, ceilings, decks and exposed structure, and gives a smoother finish on doors and metal. Rolling is better in occupied spaces where masking would take longer than painting, or where a textured finish is wanted. Many jobs use both: spray, then back-roll to work paint into porous block.
How much does commercial spray painting cost?
Commercial spray painting is priced by surface and system. Large open areas often cost less per square foot sprayed than rolled, while fine HVLP or electrostatic work is priced per item. Your quote shows the method and price for each surface.
How do you control overspray in occupied buildings?
We mask with film and paper, use low-overspray HVLP or electrostatic where possible, choose dryfall products overhead, set the right tip size and pressure, and spray after hours.
What is back-rolling?
Back-rolling means rolling over freshly sprayed paint to push it into porous surfaces like block or rough concrete, which improves fill and adhesion.
Can you spray exposed ceilings in offices?
Yes. Exposed ceilings with ducts, trays and timber are a common spray job. Everything below is masked and work is done after hours.
What equipment do you use?
Graco Mark series and similar airless rigs for walls and decks, HVLP turbines for fine finishes and Ransburg-type electrostatic units for metal.
Related Commercial Painting Services
Services often booked with commercial spray painting, on the same schedule and the same fixed-price quote.
Electrostatic Coating
Factory-like refinishing of steel doors, elevators, frames and partitions in place.
View serviceWarehouse Painting
Walls, ceiling decks, floor epoxy, line marking around 24/7 dock traffic.
View serviceFactory & Industrial Painting
Plant shutdown painting, CFIA food-grade, intumescent fireproofing, epoxy floors.
View serviceCommercial Spray Painting Near You
Areas where our commercial spray painting crews work most often.
Ready to Book Commercial Spray Painting?
Fixed-price written quote, after-hours crews and full compliance paperwork for commercial spray painting anywhere in the GTA.
- Fixed-price written quote
- After-hours by default
- WSIB + $5M liability + $2M pollution
Get a Fixed-Price Spray Painting Quote
Free site walkthrough. Estimator reply within 2 business hours.