Scratched elevator doors and frames in a Yonge corridor office tower were scuff-sanded, primed and refinished in place with electrostatic spray overnight, with no removal and no lost elevator service.
Electrostatic Painting Toronto Elevator and Steel Door Refinishing | Toronto Spectrum Commercial Painters
Factory-like refinishing of steel doors, elevators, frames and partitions in place.
Get a Fixed-Price Electrostatic Quote
Free site walkthrough. Estimator reply within 2 business hours.
Electrostatic Coating Before and After: Recent Toronto Projects
Real electrostatic coating work by our Toronto crews. Same building, same angle. Drag the handle to compare.
Electrostatic painting restores metal without taking it off the wall. Our electrostatic painting crews refinish elevator doors and cabs, steel doors and hollow metal frames, toilet partitions, lockers, railings and radiator covers in place. The paint is charged as it leaves the gun and pulled onto the grounded metal, so it wraps around edges with very little overspray and a smooth, baked-enamel look.
Electrostatic painting in Toronto is priced per item: steel doors $150-$800, elevator door sets $400-$1,200, frames $100-$400 and partition panels $200-$600, + HST. Most work is done overnight so elevators and washrooms are back in service by morning.
How Much Does Electrostatic Coating Cost in Toronto?
Electrostatic Coating runs $150-$1,200 per item (door $150-$800, elevator set $400-$1,200) + HST. Frames $100-$400, partitions $200-$600.
Frames and trim
$100-$400
- Hollow metal frames
- Railings and radiator covers
- Per opening or per run
Doors and partitions
$150-$800
- Steel doors, both sides
- Toilet partition panels $200-$600
- Lockers priced per bank
- Overnight scheduling
Elevator sets
$400-$1,200
- Elevator doors and frames
- Cab interiors and panels
- Coordinated with elevator contractor
- Back in service by morning
Fixed-price written electrostatic coating quote: the approved number is the invoice number unless you sign off on a scope change. All prices + 13% HST.
Try the cost calculatorWhat Is Electrostatic Painting?
Electrostatic painting is a spray method for metal. The spray gun, often a Ransburg electrostatic unit, gives the paint particles an electric charge. The metal being painted is grounded. Opposite charges attract, so the paint is pulled onto the metal and wraps around edges, corners and the back of rails. That charged particle wrap means far less overspray and a more even film than a standard spray gun.
The result looks close to factory-baked enamel, and it is done in place. Elevator doors, steel doors, frames and partitions never leave the building.
What Can Be Refinished With Electrostatic Painting?
- Elevator doors, frames and cab interior panels
- Steel doors and hollow metal frames
- Toilet partitions and urinal screens
- Lockers and metal shelving
- Railings, handrails and balusters
- Radiator covers, convector cabinets and metal trim
- Metal desks, filing cabinets and furniture
Electrostatic Painting vs Replacing Elevator Doors and Steel Frames
| Electrostatic refinishing | Replacement | |
|---|---|---|
| Cost | Fraction of replacement | Fabrication + install |
| Downtime | One overnight shift | Days to weeks |
| Disruption | Masking only | Removal, reinstall, patching |
| Colour change | Yes, any colour | New colour at order |
| When it fits | Scratched, faded, dated metal | Badly dented or rusted-through metal |
For most lobbies and washrooms, electrostatic painting gives the same visual result as new at a much lower cost.
How Our Electrostatic Process Works
- Clean: degrease and remove grime, fingerprints and residue.
- Scuff sand: create a profile so the new coating can grip.
- Mask: cover walls, floors, glass, hardware and anything not being painted.
- Prime: apply a bonding primer suited to the existing finish.
- Electrostatic spray: apply the finish coat with the charged gun.
- Inspect and unmask: check coverage, edges and cure, then return the area to service.
Electrostatic painting tip
Refinish elevator doors, lobby frames and washroom partitions in the same night as a corridor repaint. The whole floor looks new at once, and you only coordinate one access window.
Electrostatic Painting Cost
Electrostatic painting in Toronto is priced per item: steel doors $150-$800, elevator door sets $400-$1,200, frames $100-$400 and partition panels $200-$600, all + HST. Volume, condition, colour change and access affect the final number, and the written quote lists every item.
Electrostatic Painting for Condos and Offices
Condo boards add elevator doors and frames to corridor programs through condo common area painting. Office tower lobbies and washrooms are often done with an office painting refresh. For large-area spraying of walls, ceilings and decks, see commercial spray painting.
Why Building Managers Choose Our Electrostatic Painting Crews
Our electrostatic painting crews work overnight in Financial District and North York Centre towers, coordinate with elevator contractors and leave lobbies ready for morning. Every job carries WSIB, $5M liability and $2M pollution coverage and a 3-year specialty warranty. It is the same process our Toronto commercial painting contractors follow on every site.
Why Property Managers Hire Us for Electrostatic Coating
Four reasons property managers and operators book our electrostatic coating crews across Toronto and the GTA.
No removal
Doors, partitions and elevators are refinished where they hang. No downtime for reinstall.
Baked-enamel look
Charged spray wraps around edges for a smooth, even, factory-like finish.
Fraction of replacement
Refinishing typically costs far less than new doors, partitions or cab panels.
Overnight service
Lobbies and washrooms back in use the next morning.
How Our Electrostatic Coating Process Works
Every electrostatic coating job follows the same six steps, from the free walkthrough to the warranty certificate.
Most lobbies are refinished in one overnight shift. Washroom partitions take one night per washroom.
- 01
Site Walkthrough
Day 0, freeAn estimator measures, photographs the surfaces and talks through your schedule, finishes and access rules.
- 02
Written Quote
Day 1-3Fixed price with product spec sheets, a disruption plan, insurance documents and a timeline you can take to your board or owner.
- 03
Contract + Deposit
Day 3-7A 25% deposit secures the start date. Scope, products, finish and warranty are named in the contract.
- 04
Pre-Job Protection
Day 1Floor protection, HEPA air scrubbers, equipment moved or covered and tenant or staff notices posted.
- 05
Painting Execution
DailyA signed daily job log, after-hours check-ins with your keyholder and dustless prep wherever it is required.
- 06
Walkthrough + Warranty
HandoverPunch-list walkthrough, warranty certificate and a Net 30 B2B invoice that matches the approved quote.
Free walkthrough, fixed-price written quote, no obligation
Written electrostatic coating quote within 72 hours. $5M liability and WSIB on every job.
Electrostatic Clients on Schedule, Quality and Cleanup
"Mississauga DC full repaint around 24/7 shipping. Finished ahead, no shutdown."
"After-hours office repaint, three floors King St. Fri 7pm to Mon 5am. Invoice matched quote."
Electrostatic Coating Cost, Timing and Scheduling Questions
Straight answers about electrostatic coating in Toronto: cost, timing, products and scheduling.
What is electrostatic painting?
Electrostatic painting charges the paint particles as they leave the spray gun. The metal surface is grounded, so the charged paint is pulled onto it and wraps around edges and corners. The result is an even coat with much less overspray than conventional spraying, and a finish that looks close to factory-baked enamel.
How much does electrostatic painting cost in Toronto?
Electrostatic painting in Toronto is priced per item. Steel doors run $150-$800, elevator door and frame sets $400-$1,200, steel frames $100-$400 and metal partition panels $200-$600, + HST. Condition, colour change and access affect the price.
Is electrostatic painting cheaper than replacing elevator doors or frames?
Usually much cheaper. Replacing elevator door panels or hollow metal frames means fabrication, removal, reinstall and downtime. Electrostatic refinishing restores the surface in place overnight for a fraction of that cost, as long as the metal is not badly dented or rusted through.
Can electrostatic paint be applied to non-metal surfaces?
Electrostatic painting works on conductive metal. Non-metal surfaces such as wood or plastic need a different method, or a conductive primer in some cases.
How durable is an electrostatic finish?
With proper cleaning, scuff sanding and a bonding primer, electrostatic finishes are hard and durable and carry our 3-year specialty coating warranty.
Do you work with our elevator contractor?
Yes. We coordinate with your elevator contractor so cars are locked out safely and returned to service once the finish is dry.
Is there odour or overspray in occupied buildings?
Electrostatic spray has very little overspray, and we mask surrounding surfaces fully. Low-odour products and air scrubbers are used in occupied lobbies and washrooms.
Related Commercial Painting Services
Services often booked with electrostatic coating, on the same schedule and the same fixed-price quote.
Condo Common Area Painting
Corridor, lobby, elevator, garage painting with board notification + PM coord.
View serviceCommercial Spray Painting
Airless, HVLP and electrostatic spraying for fast, factory-smooth commercial finishes.
View serviceOffice Painting
After-hours office painting, HEPA containment, tenant notification built in.
View serviceElectrostatic Coating Near You
Areas where our electrostatic coating crews work most often.
Ready to Book Electrostatic Coating?
Fixed-price written quote, after-hours crews and full compliance paperwork for electrostatic coating anywhere in the GTA.
- Fixed-price written quote
- After-hours by default
- WSIB + $5M liability + $2M pollution
Get a Fixed-Price Electrostatic Quote
Free site walkthrough. Estimator reply within 2 business hours.