Flaking paint over production lines at a food plant was removed and replaced with CFIA-acceptable two-component washdown epoxy inside one planned shutdown, with cure time built in so sanitation ran before restart.
Factory Painting Toronto Industrial Painters GTA | Toronto Spectrum Commercial Painters
Plant shutdown painting, CFIA food-grade, intumescent fireproofing, epoxy floors.
Get a Fixed-Price Factory & Industrial Quote
Free site walkthrough. Estimator reply within 2 business hours.
Factory & Industrial Painting Before and After: Recent Toronto Projects
Real factory & industrial painting work by our Toronto crews. Same building, same angle. Drag the handle to compare.
Factory painting lives or dies by the shutdown window. Our industrial painting crews plan every job with your maintenance team so materials, lifts and containment are staged before the line stops, and coatings are cured before it restarts. We paint food and beverage plants with CFIA-acceptable washdown systems, coat structural steel, equipment and tanks, and finish floors that stand up to forklifts and chemicals.
Factory painting in Toronto runs $2-$5/sqft + HST for walls, with specialty coatings such as food-grade epoxy, intumescent fireproofing and chemical-resistant systems at $8-$25/sqft. Each quote is fixed-price and written, naming the coating system, the surface prep standard and the shutdown schedule.
How Much Does Factory & Industrial Painting Cost in Toronto?
Factory & Industrial Painting runs $2-$5 per sqft (walls) + HST. Specialty coatings $8-$25/sqft.
Low band
$2.00/sqft
- Block or metal walls, sprayed
- Sound existing coatings
- Non-production zones
Mid band
$3.50/sqft
- Production walls and ceilings
- Equipment masking and containment
- Two-component epoxy systems
- Shutdown scheduling
High band
$5.00/sqft
- CFIA washdown zones
- Heavy prep and coating removal
- Structural steel and tanks
- Specialty systems quoted $8-$25/sqft
Fixed-price written factory & industrial painting quote: the approved number is the invoice number unless you sign off on a scope change. All prices + 13% HST.
Try the cost calculatorWhat Does Factory and Industrial Painting Cover?
Factory painting covers production halls, sanitation zones, warehouses, mezzanines, offices and the steel that holds the building up. Industrial painting adds the equipment, tanks, piping and floors that keep the plant running. Our crews work in food and beverage, pharma, automotive, aerospace and metal fabrication plants across the GTA.
- Production walls and ceilings in washdown-rated systems
- Structural steel columns, beams, crane rails and mezzanines
- Tanks, machine guards and equipment housings
- Process piping and mechanical rooms, colour-coded to ANSI/ASME A13.1
- Floors in epoxy, urethane cement or chemical-resistant systems
- Fire-rated intumescent coatings on exposed steel
Factory painting and industrial painting are often booked together. A typical factory painting scope covers production walls and ceilings, while the industrial painting scope covers steel, tanks, piping and floors. Our factory painting crews and industrial painting crews work from one schedule, so a single shutdown can cover both. That is why plant managers across the GTA treat us as their factory painting and industrial painting contractor of record, not a one-off vendor.
CFIA Requirements for Painting Food Processing Plants
Flaking paint over a food line is one of the fastest ways to fail an audit. The CFIA expects surfaces in food areas to be smooth, durable, non-absorbent and easy to clean and sanitize. For factory painting in food plants, that means:
- Removing all failing and loose coatings before recoating
- Using two-component epoxy or similar washdown-rated systems on walls and ceilings
- Selecting coatings acceptable for incidental food contact areas where needed
- Allowing full cure before sanitation chemicals and hot water washdown
- Keeping product data sheets on file for your food safety program
Our Scarborough food plant project replaced flaking paint over production lines with CFIA-acceptable washdown epoxy inside one planned shutdown, with cure time built in so sanitation ran before restart.
How to Plan a Factory Shutdown Painting Schedule
Shutdowns are short and expensive, so the plan starts weeks earlier. Our project manager walks the plant with your maintenance lead, lists every surface and coating system, and builds an hour-by-hour schedule.
- Two to six weeks out: scope, coating systems and prep standards agreed; lifts and materials ordered.
- Week before: containment materials staged, equipment protection plan signed off, crew roster fixed.
- Day one of shutdown: equipment wrapped, containment up, prep starts the first hour.
- Middle days: primer and finish coats in shifts, with dry film thickness checked.
- Final day: cure time, clean-up and handover so sanitation can run before restart.
Industrial painting tip
Book the painting contractor before the shutdown date is final. Lift availability and coating cure times often decide how much you can finish in one window.
Industrial Coating Systems We Use
| Surface | Typical system | Why |
|---|---|---|
| Washdown walls and ceilings | Two-component epoxy | Chemical and moisture resistance |
| Structural steel, interior | Epoxy primer + epoxy finish | Durable, cleanable |
| Structural steel, UV or colour critical | Zinc-rich primer + epoxy + aliphatic polyurethane | Corrosion protection and colour hold |
| Equipment and guards | Direct-to-Metal (DTM) enamel | Fast return to service |
| Exposed steel needing a fire rating | Listed intumescent | ULC and UL fire endurance |
Surface prep is named in every quote. Factory painting quotes from other industrial painters often skip this line; ours never do, because surface prep decides how long industrial painting lasts. Heavy rust and mill scale are removed by industrial sandblasting to SSPC-SP 6 or SP 10. Lighter work uses SSPC-SP 3 power tool cleaning.
Factory Painting Cost
Factory painting in Toronto runs $2-$5/sqft + HST for walls. Specialty coatings, including CFIA washdown epoxy, chemical-resistant linings and intumescent fireproofing, run $8-$25/sqft depending on the system and thickness. Costs rise with heavy prep, height, confined spaces and short shutdown windows that need larger crews.
Piping, Mechanical and Floors
Most plant programs include more than walls. Process piping and mechanical rooms are recoated and colour-coded through our pipe, duct and mechanical painting service. Floors in production, washdown and cold areas are covered under epoxy floor coating, including urethane cement for thermal shock and hot water washdown.
Industrial Painting Across the GTA
Our industrial painting crews work along the Scarborough 401 corridor food belt, in Vaughan and Concord fabrication shops, in Oakville and Burlington automotive and pharma plants and in Oshawa manufacturing. Every crew carries confined space, aerial lift, scaffold and Working at Heights tickets, plus WSIB, $5M liability and $2M pollution coverage, and every quote is a fixed price your plant manager can budget against. That is the same standard our commercial painters in Toronto bring to every building type.
Why Property Managers Hire Us for Factory & Industrial Painting
Four reasons property managers and operators book our factory & industrial painting crews across Toronto and the GTA.
Shutdown-first planning
Materials, lifts and containment are staged before the line stops. Cure times are in the plan, not an afterthought.
CFIA food-grade systems
Washdown-rated, non-absorbent coatings that pass food safety audits.
SSPC prep standards
Surface prep named in the quote, from hand tool cleaning to SSPC-SP 10 near-white blast.
Confined space and lift tickets
Crews trained for confined space, aerial lifts, scaffold and Working at Heights.
How Our Factory & Industrial Painting Process Works
Every factory & industrial painting job follows the same six steps, from the free walkthrough to the warranty certificate.
Most plant painting fits inside a 3 to 10 day shutdown. Larger programs are split across several shutdowns or run zone by zone between shifts.
- 01
Site Walkthrough
Day 0, freeAn estimator measures, photographs the surfaces and talks through your schedule, finishes and access rules.
- 02
Written Quote
Day 1-3Fixed price with product spec sheets, a disruption plan, insurance documents and a timeline you can take to your board or owner.
- 03
Contract + Deposit
Day 3-7A 25% deposit secures the start date. Scope, products, finish and warranty are named in the contract.
- 04
Pre-Job Protection
Day 1Floor protection, HEPA air scrubbers, equipment moved or covered and tenant or staff notices posted.
- 05
Painting Execution
DailyA signed daily job log, after-hours check-ins with your keyholder and dustless prep wherever it is required.
- 06
Walkthrough + Warranty
HandoverPunch-list walkthrough, warranty certificate and a Net 30 B2B invoice that matches the approved quote.
Free walkthrough, fixed-price written quote, no obligation
Written factory & industrial painting quote within 72 hours. $5M liability and WSIB on every job.
Factory & Industrial Clients on Schedule, Quality and Cleanup
"Mississauga DC full repaint around 24/7 shipping. Finished ahead, no shutdown."
"After-hours office repaint, three floors King St. Fri 7pm to Mon 5am. Invoice matched quote."
Factory & Industrial Painting Cost, Timing and Scheduling Questions
Straight answers about factory & industrial painting in Toronto: cost, timing, products and scheduling.
How much does factory painting cost in Toronto?
Factory painting in Toronto runs $2-$5/sqft + HST for walls and ceilings. Non-production areas with sound coatings sit at the low end. Production zones with equipment masking and two-component epoxy sit mid-band. CFIA washdown zones, heavy coating removal, structural steel and tanks sit at the high end. Specialty systems such as intumescent fireproofing or chemical-resistant linings run $8-$25/sqft.
What are CFIA requirements for painting food processing plants?
The CFIA expects surfaces in food areas to be smooth, durable, non-absorbent and easy to clean and sanitize, with no flaking paint over product zones. In practice that means two-component epoxy or similar washdown-rated systems on walls and ceilings, proper prep to remove failing coatings, and full cure before sanitation and restart. We provide product data sheets for your food safety file.
How do you plan a factory shutdown painting schedule?
We walk the plant with maintenance two to six weeks before the shutdown, list every surface and its coating system, and build an hour-by-hour plan. Materials, lifts and containment are staged before the line stops. Cure times and sanitation time are blocked in before restart. Crews run in shifts so the plan fits the window.
Can you paint while the plant is running?
In some areas, yes. Warehouses, offices, mezzanines and non-production zones are often painted between shifts. Production zones near open product are usually painted during shutdown for food safety and quality reasons.
Which coating systems do you use on structural steel?
Typical systems are a zinc-rich or epoxy primer, an epoxy intermediate coat and an aliphatic polyurethane topcoat for colour and UV stability. Products such as Sherwin-Williams Macropoxy 646 and Tnemec systems are common. Surface prep usually follows SSPC-SP 6 commercial blast or SSPC-SP 3 power tool cleaning, depending on exposure.
Do you coat tanks, machinery and equipment?
Yes. Tanks, machine guards, frames and equipment housings are cleaned, prepped and coated with direct-to-metal or epoxy systems. Equipment that cannot be painted in place is masked and protected.
Can you apply intumescent fireproofing in a plant?
Yes. Exposed structural steel that needs a fire rating gets a listed intumescent coating applied to the required dry film thickness, with readings logged for inspection. See our intumescent fireproofing page for details.
What warranty do industrial coatings carry?
Standard commercial painting carries 2 years and specialty industrial coatings carry 3 years of workmanship warranty, subject to the manufacturer specification and operating conditions in the plant.
Related Commercial Painting Services
Services often booked with factory & industrial painting, on the same schedule and the same fixed-price quote.
Intumescent Fireproofing
UL and ULC rated intumescent coatings on structural steel, with DFT sign-off.
View serviceIndustrial Sandblasting
Dustless, soda and abrasive blasting to strip coatings and profile steel and concrete.
View servicePipe, Duct & Mechanical Painting
ANSI/ASME colour-coded pipe, HVAC duct and mechanical room coatings.
View serviceFactory & Industrial Painting Near You
Areas where our factory & industrial painting crews work most often.
Ready to Book Factory & Industrial Painting?
Fixed-price written quote, after-hours crews and full compliance paperwork for factory & industrial painting anywhere in the GTA.
- Fixed-price written quote
- After-hours by default
- WSIB + $5M liability + $2M pollution
Get a Fixed-Price Factory & Industrial Quote
Free site walkthrough. Estimator reply within 2 business hours.